UK trades & small contractors

Site paperwork, written and signed off.

Tell us about the job in ten quick questions. We write your RAMS or Construction Phase Plan for that exact task, then an SMSTS qualified site professional reviews and signs it off. Standard RAMS £89, back within 24 hours.

Order your RAMS · £89 See the full rate card

✓ Reviewed by an SMSTS site professional ✓ £1,000,000 professional indemnity insurance ✓ PDF + editable Word ✓ One revision round included

SP-RAMS-02 · REV A

RAMS | Pitched Roof Repairs

1. Document control✓

2. Scope of works✓

3. Key hazards✓

4. Risk assessment (5×5)✓

5. Method statement✓

9. Emergency arrangements✓

SP-CPP · CDM 2015

Construction Phase Plan

Dutyholders & F10✓

Site rules & welfare✓

Key phase risks✓

Fire & emergency✓

Contractor RAMS review✓

ReviewedSMSTS · Site Professional

§ 01

How it works

Tell us the job

Ten questions: the task, the site, your operatives, access, anything unusual. Five minutes on your phone, in your own words.

After checkout

We write it. A site professional signs it off.

Your document is written for that exact job, then reviewed and signed off by an SMSTS qualified professional with years running live UK sites. Not a template. Not a generator printout.

Within 24h (RAMS)

Hand it over, start work

Branded PDF plus an editable Word copy, written to current legislation and principal contractor expectations. One revision round included.

PDF + DOCX

§ 03

What a SITEPAPERS document looks like

Specimen | risk assessment extract (pitched roofing)

Hazard	Before	Control measures	After
Fall from roof edge, eaves or verge	4×5 = 20	Full perimeter independent scaffold, double guardrails (main rail min 950 mm), toe boards; collective protection first per Work at Height Regulations 2005 hierarchy; no start before scaffold handover certificate.	2×4 = 8
Respirable crystalline silica from tile cutting	4×4 = 16	Mechanical cutting with water suppression; cutting station downwind at ground level; FFP3 RPE, face fit tested; vacuum or wet clean-up only.	2×4 = 8
Adverse weather	4×4 = 16	Daily recorded weather check; roof work stops at mean wind 23 mph; sheet handling stops at gusts above 17 mph; any operative may call the stop.	2×3 = 6

Written to the regulations that actually apply to your task: CDM 2015, Work at Height, COSHH, PUWER, and HSE guidance like HSG33 for roof work, cited where they earn their place.
Site-specific. Your company name, your site address, your access arrangements, your plant. Principal contractors reject generic paperwork; yours will not read generic because it is not.
Reviewed and signed off by an SMSTS qualified professional before delivery. If our reviewer would not accept it on their own site, it does not ship.
Delivered as a branded PDF plus an editable Word copy you keep and can adapt on future jobs.

§ 04

Straight answers

We are not a software subscription and not an AI printout mill. We are a documentation service for working trades: you tell us the job, we hand back paperwork you can stand behind at the site gate. No accounts to manage, no monthly fee, no document builder to learn at 9pm.

Fixed rates, agreed before payment. No subscriptions, ever.
One revision round included on every document.
Covered by £1,000,000 professional indemnity insurance.
You confirm the job facts; we put them into a document that holds up.
We do not cover licensed asbestos removal or structural demolition.
If a task needs more than paperwork | it needs a safety consultant on site | we say so instead of taking your money.

§ 05

Questions trades actually ask

Do I legally need a RAMS?

Risk assessment is a legal duty for every employer and self-employed person (Management of Health and Safety at Work Regulations 1999), and it must be written down if you have five or more employees. In practice the law is only half the story: principal contractors will not let you start on a managed site without an approved RAMS, whatever your size. That approval is what we write for.

Do I need a Construction Phase Plan for a small domestic job?

Yes. Under CDM 2015 a construction phase plan is required for every construction project, including domestic work. For small jobs it can be short and proportionate, which is exactly how we write them.

Who actually writes and checks my document?

Your document is drafted by SITEPAPERS and then reviewed and signed off by an SMSTS qualified construction professional with years of experience running live UK sites, acting as the competent person check before anything is delivered.

How fast is 24 hours, really?

The clock starts when you complete the ten-question intake after checkout, and 24 hours is the delivery commitment for a standard RAMS. Complex RAMS run 24 to 48 hours and phase plans 48 to 72 hours. If we ever cannot meet the clock we tell you before you pay, not after.

What if the principal contractor asks for changes?

Every document includes one revision round, so send their comments over and we turn the revision around, normally same day. Further revisions or new tasks are covered by the £59 additional-RAMS rate.

Why not just use an AI generator or a £10 template?

Generators and templates produce the generic paperwork principal contractors have learned to reject: wrong hazards, boilerplate controls, no connection to your actual site. Our documents are written for your specific job and then human-reviewed by someone who has stood where your paperwork will be read. If a cheap template does the job for you, honestly, use one; when it gets knocked back, we are here.